R080522_接收機技術規範
在 platform 上各接收機的所在位置如下所示
這原來是 Autolab 公司的設計圖, 原始規格由黃承光提供, 原來各機器的編號一直都很混亂. 後來由滕曉峄決定最後的號碼, 以後的各種對基線及接收機的描述就以它為準了.
接收機位置 : (對天頂 Z 方向為縱軸, 90 度為橫軸)
#1 = ( 320.8, 396.8)
#2 = (1321.1, 247.7)
#3 = (274, 1409.6)
#4 = (1325.5, 913)
#5 = (470.1, 2058.2)
#6 = (1302.9, 2086.7)
由上面各個坐標, 我們可以算出各個 pair (15 個) 的基線長度及對於天頂的角度
Receiver Position
| Recv1 | 320.8 | 369.8 | |||||
| Recv2 | 1321.1 | 247.7 | |||||
| Recv3 | 274 | 1406.9 | |||||
| Recv4 | 1325.5 | 913 | |||||
| Recv5 | 470.1 | 2058.2 | |||||
| Recv6 | 1302.9 | 2086.7 | |||||
|
Pair displacement |
pair distance | pair angle by deg | |||||
| pair 1x2 | -1000.3 | 122.1 | 1007.724 | 173.0407 | |||
| pair 1x3 | 46.8 | -1037.1 | 1038.155 | -87.4162 | |||
| pair 1x4 | -1004.7 | -543.2 | 1142.142 | -151.602 | |||
| pair 1x5 | -149.3 | -1688.4 | 1694.988 | -95.0533 | |||
| pair 1x6 | -982.1 | -1716.9 | 1977.945 | -119.77 | |||
| pair 2x3 | 1047.1 | -1159.2 | 1562.102 | -47.9086 | |||
| pair 2x4 | -4.4 | -665.3 | 665.3145 | -90.3789 | |||
| pair 2x5 | 851 | -1810.5 | 2000.528 | -64.8248 | |||
| pair 2x6 | 18.2 | -1839 | 1839.09 | -89.433 | |||
| pair 3x4 | -1051.5 | 493.9 | 1161.718 | 154.8401 | |||
| pair 3x5 | -196.1 | -651.3 | 680.1815 | -106.757 | |||
| pair 3x6 | -1028.9 | -679.8 | 1233.192 | -146.547 | |||
| pair 4x5 | 855.4 | -1145.2 | 1429.403 | -53.2423 | |||
| pair 4x6 | 22.6 | -1173.7 | 1173.918 | -88.8969 | |||
| pair 5x6 | -832.8 | -28.5 | 833.2875 | -178.04 | |||
全站熱搜
留言列表
